Rounded Cut Wire
Rounded Cut Wire accurately cuts high strength steel and removes sharp edges.
It is suitable for hard shot peening for high strength steel because of its
high durability and uniform hardness and diameter
Advantages of using Rounded Cut Wire
-
Reduction of cost due to its durability
-
Uniform peening effect with uniform hardness and diameter
-
Environment preservation with no dust (crack)
Specification
Hardness (HV) |
Mean Diameter |
0.3 |
0.4 |
0.6 |
0.8 |
1.0 |
1.2 |
450 - 550 |
o |
o |
o |
o |
o |
o |
550 - 650 |
o |
o |
o |
o |
o |
o |
650 - 750 |
o |
o |
o |
o |
o |
o |
750 - 850 |
o |
o |
o |
o |
o |
- |
Examples of Application for:
Zinc Cut Wire
Zinc Cut Wire is highly recommended in shot blasting for its high quality
and safety.
Sensitivity to explosion of zinc is less than 1/10 compare to aluminum, therefore
zinc cut wire can be used safely. Also specific gravity of zinc is 2.5 times
larger than that of aluminum which means that Cut Wire blast can be operated
effectively.
Particle Distribution
mm |
ZBS20 |
ZBS15 |
ZBS12 |
ZBS10 |
ZBS08 |
|
2.0mm |
1.5mm |
1.2mm |
1.0mm |
0.8mm |
Hardness
HV 35-55
Chemical Composition
Z n |
99.9% or more |
Pb |
0.007% or less |
Fe |
0.005% or less |
Cd |
0.004% or less |
|